305/40R17 vs 305/45R17
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
305/40R17
- Section width
- 305 mm
- Aspect ratio
- 40%
- Rim
- 17"
- Sidewall
- 122.0 mm
- Overall diameter
- 675.8 mm
- Revs / mile
- 758
305/45R17
- Section width
- 305 mm
- Aspect ratio
- 45%
- Rim
- 17"
- Sidewall
- 137.3 mm
- Overall diameter
- 706.3 mm
- Revs / mile
- 725
Difference
- Overall diameter
- +30.5 mm (+4.51%)
- Sidewall
- +15.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +15.3 mm
- Speedometer error
- +4.51%
- At indicated 60 mph
- actual 62.71 mph
Will 305/45R17 fit instead of 305/40R17?
The overall diameter changes by 4.51%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).