305/30R21 vs 305/35R21
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
305/30R21
- Section width
- 305 mm
- Aspect ratio
- 30%
- Rim
- 21"
- Sidewall
- 91.5 mm
- Overall diameter
- 716.4 mm
- Revs / mile
- 715
305/35R21
- Section width
- 305 mm
- Aspect ratio
- 35%
- Rim
- 21"
- Sidewall
- 106.8 mm
- Overall diameter
- 746.9 mm
- Revs / mile
- 686
Difference
- Overall diameter
- +30.5 mm (+4.26%)
- Sidewall
- +15.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +15.3 mm
- Speedometer error
- +4.26%
- At indicated 60 mph
- actual 62.55 mph
Will 305/35R21 fit instead of 305/30R21?
The overall diameter changes by 4.26%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).