295/65R15 vs 305/65R15
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
295/65R15
- Section width
- 295 mm
- Aspect ratio
- 65%
- Rim
- 15"
- Sidewall
- 191.8 mm
- Overall diameter
- 764.5 mm
- Revs / mile
- 670
305/65R15
- Section width
- 305 mm
- Aspect ratio
- 65%
- Rim
- 15"
- Sidewall
- 198.3 mm
- Overall diameter
- 777.5 mm
- Revs / mile
- 659
Difference
- Overall diameter
- +13.0 mm (+1.70%)
- Sidewall
- +6.5 mm
- Tread width
- +10 mm
- Ride height (axle)
- +6.5 mm
- Speedometer error
- +1.70%
- At indicated 60 mph
- actual 61.02 mph
Will 305/65R15 fit instead of 295/65R15?
The overall diameter changes by 1.70%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).