295/40R19 vs 305/40R19
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
295/40R19
- Section width
- 295 mm
- Aspect ratio
- 40%
- Rim
- 19"
- Sidewall
- 118.0 mm
- Overall diameter
- 718.6 mm
- Revs / mile
- 713
305/40R19
- Section width
- 305 mm
- Aspect ratio
- 40%
- Rim
- 19"
- Sidewall
- 122.0 mm
- Overall diameter
- 726.6 mm
- Revs / mile
- 705
Difference
- Overall diameter
- +8.0 mm (+1.11%)
- Sidewall
- +4.0 mm
- Tread width
- +10 mm
- Ride height (axle)
- +4.0 mm
- Speedometer error
- +1.11%
- At indicated 60 mph
- actual 60.67 mph
Will 305/40R19 fit instead of 295/40R19?
The overall diameter changes by 1.11%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).