285/65R18 vs 285/70R18
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
285/65R18
- Section width
- 285 mm
- Aspect ratio
- 65%
- Rim
- 18"
- Sidewall
- 185.3 mm
- Overall diameter
- 827.7 mm
- Revs / mile
- 619
285/70R18
- Section width
- 285 mm
- Aspect ratio
- 70%
- Rim
- 18"
- Sidewall
- 199.5 mm
- Overall diameter
- 856.2 mm
- Revs / mile
- 598
Difference
- Overall diameter
- +28.5 mm (+3.44%)
- Sidewall
- +14.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +14.3 mm
- Speedometer error
- +3.44%
- At indicated 60 mph
- actual 62.07 mph
Will 285/70R18 fit instead of 285/65R18?
The overall diameter changes by 3.44%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).