285/55R16 vs 285/60R16
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
285/55R16
- Section width
- 285 mm
- Aspect ratio
- 55%
- Rim
- 16"
- Sidewall
- 156.8 mm
- Overall diameter
- 719.9 mm
- Revs / mile
- 712
285/60R16
- Section width
- 285 mm
- Aspect ratio
- 60%
- Rim
- 16"
- Sidewall
- 171.0 mm
- Overall diameter
- 748.4 mm
- Revs / mile
- 684
Difference
- Overall diameter
- +28.5 mm (+3.96%)
- Sidewall
- +14.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +14.3 mm
- Speedometer error
- +3.96%
- At indicated 60 mph
- actual 62.38 mph
Will 285/60R16 fit instead of 285/55R16?
The overall diameter changes by 3.96%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).