265/70R17 vs 265/65R18
Side-by-side comparison of overall diameter, sidewall height, speedometer error, and ride-height change.
Safe to swap — Diameter difference is under 1.5% — within normal tolerance.
To scale
265/70R17
- Section width
- 265 mm
- Aspect ratio
- 70%
- Rim diameter
- 17"
- Sidewall
- 185.5 mm
- Overall diameter
- 802.8 mm
- Circumference
- 2522 mm
- Revs / mile
- 638
- Revs / km
- 396
265/65R18
- Section width
- 265 mm
- Aspect ratio
- 65%
- Rim diameter
- 18"
- Sidewall
- 172.3 mm
- Overall diameter
- 801.7 mm
- Circumference
- 2519 mm
- Revs / mile
- 639
- Revs / km
- 397
Difference
- Overall diameter
- -1.1 mm (-0.14%)
- Sidewall height
- -13.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- -0.5 mm
- Speedometer error
- -0.14%
- At indicated 60 mph
- actual 59.9 mph
- At indicated 100 km/h
- actual 99.9 km/h
Will 265/65R18 fit instead of 265/70R17?
The overall diameter changes by 0.14%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter — outside-to-outside height of the tire. Affects ride height, gearing, and speedometer calibration.
- Sidewall height — rubber from rim edge to tread. Lower sidewall gives sharper steering response but a harsher ride.
- Speedometer error — how far off your indicated speed will be after the swap. Positive means the speedo under-reads (actual speed is higher than shown).