265/40R16 vs 275/40R16
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
265/40R16
- Section width
- 265 mm
- Aspect ratio
- 40%
- Rim
- 16"
- Sidewall
- 106.0 mm
- Overall diameter
- 618.4 mm
- Revs / mile
- 828
275/40R16
- Section width
- 275 mm
- Aspect ratio
- 40%
- Rim
- 16"
- Sidewall
- 110.0 mm
- Overall diameter
- 626.4 mm
- Revs / mile
- 818
Difference
- Overall diameter
- +8.0 mm (+1.29%)
- Sidewall
- +4.0 mm
- Tread width
- +10 mm
- Ride height (axle)
- +4.0 mm
- Speedometer error
- +1.29%
- At indicated 60 mph
- actual 60.78 mph
Will 275/40R16 fit instead of 265/40R16?
The overall diameter changes by 1.29%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).