245/30R17 vs 245/35R17
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
245/30R17
- Section width
- 245 mm
- Aspect ratio
- 30%
- Rim
- 17"
- Sidewall
- 73.5 mm
- Overall diameter
- 578.8 mm
- Revs / mile
- 885
245/35R17
- Section width
- 245 mm
- Aspect ratio
- 35%
- Rim
- 17"
- Sidewall
- 85.8 mm
- Overall diameter
- 603.3 mm
- Revs / mile
- 849
Difference
- Overall diameter
- +24.5 mm (+4.23%)
- Sidewall
- +12.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +12.3 mm
- Speedometer error
- +4.23%
- At indicated 60 mph
- actual 62.54 mph
Will 245/35R17 fit instead of 245/30R17?
The overall diameter changes by 4.23%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).