235/65R18 vs 235/70R18
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
235/65R18
- Section width
- 235 mm
- Aspect ratio
- 65%
- Rim
- 18"
- Sidewall
- 152.8 mm
- Overall diameter
- 762.7 mm
- Revs / mile
- 672
235/70R18
- Section width
- 235 mm
- Aspect ratio
- 70%
- Rim
- 18"
- Sidewall
- 164.5 mm
- Overall diameter
- 786.2 mm
- Revs / mile
- 652
Difference
- Overall diameter
- +23.5 mm (+3.08%)
- Sidewall
- +11.8 mm
- Tread width
- +0 mm
- Ride height (axle)
- +11.8 mm
- Speedometer error
- +3.08%
- At indicated 60 mph
- actual 61.85 mph
Will 235/70R18 fit instead of 235/65R18?
The overall diameter changes by 3.08%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).