235/60R16 vs 245/60R16
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
235/60R16
- Section width
- 235 mm
- Aspect ratio
- 60%
- Rim
- 16"
- Sidewall
- 141.0 mm
- Overall diameter
- 688.4 mm
- Revs / mile
- 744
245/60R16
- Section width
- 245 mm
- Aspect ratio
- 60%
- Rim
- 16"
- Sidewall
- 147.0 mm
- Overall diameter
- 700.4 mm
- Revs / mile
- 731
Difference
- Overall diameter
- +12.0 mm (+1.74%)
- Sidewall
- +6.0 mm
- Tread width
- +10 mm
- Ride height (axle)
- +6.0 mm
- Speedometer error
- +1.74%
- At indicated 60 mph
- actual 61.05 mph
Will 245/60R16 fit instead of 235/60R16?
The overall diameter changes by 1.74%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).