225/45R20 vs 225/50R20
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
225/45R20
- Section width
- 225 mm
- Aspect ratio
- 45%
- Rim
- 20"
- Sidewall
- 101.3 mm
- Overall diameter
- 710.5 mm
- Revs / mile
- 721
225/50R20
- Section width
- 225 mm
- Aspect ratio
- 50%
- Rim
- 20"
- Sidewall
- 112.5 mm
- Overall diameter
- 733.0 mm
- Revs / mile
- 699
Difference
- Overall diameter
- +22.5 mm (+3.17%)
- Sidewall
- +11.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +11.3 mm
- Speedometer error
- +3.17%
- At indicated 60 mph
- actual 61.90 mph
Will 225/50R20 fit instead of 225/45R20?
The overall diameter changes by 3.17%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).