225/40R15 vs 235/40R15
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
225/40R15
- Section width
- 225 mm
- Aspect ratio
- 40%
- Rim
- 15"
- Sidewall
- 90.0 mm
- Overall diameter
- 561.0 mm
- Revs / mile
- 913
235/40R15
- Section width
- 235 mm
- Aspect ratio
- 40%
- Rim
- 15"
- Sidewall
- 94.0 mm
- Overall diameter
- 569.0 mm
- Revs / mile
- 900
Difference
- Overall diameter
- +8.0 mm (+1.43%)
- Sidewall
- +4.0 mm
- Tread width
- +10 mm
- Ride height (axle)
- +4.0 mm
- Speedometer error
- +1.43%
- At indicated 60 mph
- actual 60.86 mph
Will 235/40R15 fit instead of 225/40R15?
The overall diameter changes by 1.43%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).