215/70R21 vs 225/70R21
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
215/70R21
- Section width
- 215 mm
- Aspect ratio
- 70%
- Rim
- 21"
- Sidewall
- 150.5 mm
- Overall diameter
- 834.4 mm
- Revs / mile
- 614
225/70R21
- Section width
- 225 mm
- Aspect ratio
- 70%
- Rim
- 21"
- Sidewall
- 157.5 mm
- Overall diameter
- 848.4 mm
- Revs / mile
- 604
Difference
- Overall diameter
- +14.0 mm (+1.68%)
- Sidewall
- +7.0 mm
- Tread width
- +10 mm
- Ride height (axle)
- +7.0 mm
- Speedometer error
- +1.68%
- At indicated 60 mph
- actual 61.01 mph
Will 225/70R21 fit instead of 215/70R21?
The overall diameter changes by 1.68%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).