215/65R17 vs 215/60R18
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
215/65R17
- Section width
- 215 mm
- Aspect ratio
- 65%
- Rim
- 17"
- Sidewall
- 139.8 mm
- Overall diameter
- 711.3 mm
- Revs / mile
- 720
215/60R18
- Section width
- 215 mm
- Aspect ratio
- 60%
- Rim
- 18"
- Sidewall
- 129.0 mm
- Overall diameter
- 715.2 mm
- Revs / mile
- 716
Difference
- Overall diameter
- +3.9 mm (+0.55%)
- Sidewall
- -10.8 mm
- Tread width
- +0 mm
- Ride height (axle)
- +2.0 mm
- Speedometer error
- +0.55%
- At indicated 60 mph
- actual 60.33 mph
Will 215/60R18 fit instead of 215/65R17?
The overall diameter changes by 0.55%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).