215/40R15 vs 215/45R15
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
215/40R15
- Section width
- 215 mm
- Aspect ratio
- 40%
- Rim
- 15"
- Sidewall
- 86.0 mm
- Overall diameter
- 553.0 mm
- Revs / mile
- 926
215/45R15
- Section width
- 215 mm
- Aspect ratio
- 45%
- Rim
- 15"
- Sidewall
- 96.8 mm
- Overall diameter
- 574.5 mm
- Revs / mile
- 892
Difference
- Overall diameter
- +21.5 mm (+3.89%)
- Sidewall
- +10.8 mm
- Tread width
- +0 mm
- Ride height (axle)
- +10.8 mm
- Speedometer error
- +3.89%
- At indicated 60 mph
- actual 62.33 mph
Will 215/45R15 fit instead of 215/40R15?
The overall diameter changes by 3.89%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).