205/45R18 vs 205/50R18
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
205/45R18
- Section width
- 205 mm
- Aspect ratio
- 45%
- Rim
- 18"
- Sidewall
- 92.3 mm
- Overall diameter
- 641.7 mm
- Revs / mile
- 798
205/50R18
- Section width
- 205 mm
- Aspect ratio
- 50%
- Rim
- 18"
- Sidewall
- 102.5 mm
- Overall diameter
- 662.2 mm
- Revs / mile
- 774
Difference
- Overall diameter
- +20.5 mm (+3.19%)
- Sidewall
- +10.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +10.3 mm
- Speedometer error
- +3.19%
- At indicated 60 mph
- actual 61.92 mph
Will 205/50R18 fit instead of 205/45R18?
The overall diameter changes by 3.19%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).