165/70R22 vs 175/70R22
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
165/70R22
- Section width
- 165 mm
- Aspect ratio
- 70%
- Rim
- 22"
- Sidewall
- 115.5 mm
- Overall diameter
- 789.8 mm
- Revs / mile
- 649
175/70R22
- Section width
- 175 mm
- Aspect ratio
- 70%
- Rim
- 22"
- Sidewall
- 122.5 mm
- Overall diameter
- 803.8 mm
- Revs / mile
- 637
Difference
- Overall diameter
- +14.0 mm (+1.77%)
- Sidewall
- +7.0 mm
- Tread width
- +10 mm
- Ride height (axle)
- +7.0 mm
- Speedometer error
- +1.77%
- At indicated 60 mph
- actual 61.06 mph
Will 175/70R22 fit instead of 165/70R22?
The overall diameter changes by 1.77%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).