165/65R20 vs 175/65R20
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
165/65R20
- Section width
- 165 mm
- Aspect ratio
- 65%
- Rim
- 20"
- Sidewall
- 107.3 mm
- Overall diameter
- 722.5 mm
- Revs / mile
- 709
175/65R20
- Section width
- 175 mm
- Aspect ratio
- 65%
- Rim
- 20"
- Sidewall
- 113.8 mm
- Overall diameter
- 735.5 mm
- Revs / mile
- 696
Difference
- Overall diameter
- +13.0 mm (+1.80%)
- Sidewall
- +6.5 mm
- Tread width
- +10 mm
- Ride height (axle)
- +6.5 mm
- Speedometer error
- +1.80%
- At indicated 60 mph
- actual 61.08 mph
Will 175/65R20 fit instead of 165/65R20?
The overall diameter changes by 1.80%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).