165/35R16 vs 165/40R16
Comparison of overall diameter, sidewall, speedometer error, and ride-height change between these two tire sizes.
165/35R16
- Section width
- 165 mm
- Aspect ratio
- 35%
- Rim
- 16"
- Sidewall
- 57.8 mm
- Overall diameter
- 521.9 mm
- Revs / mile
- 982
165/40R16
- Section width
- 165 mm
- Aspect ratio
- 40%
- Rim
- 16"
- Sidewall
- 66.0 mm
- Overall diameter
- 538.4 mm
- Revs / mile
- 951
Difference
- Overall diameter
- +16.5 mm (+3.16%)
- Sidewall
- +8.3 mm
- Tread width
- +0 mm
- Ride height (axle)
- +8.3 mm
- Speedometer error
- +3.16%
- At indicated 60 mph
- actual 61.90 mph
Will 165/40R16 fit instead of 165/35R16?
The overall diameter changes by 3.16%. Most manufacturers consider a swap acceptable when the difference stays under 3% — beyond that, you may see speedometer error, ABS/TPMS warnings, or wheel-well clearance problems. This page only covers the math; your vehicle's wheel arches, suspension geometry, and load rating still matter.
What the numbers mean
- Overall diameter is the outside-to-outside height of the tire. Affects ride height, gearing, and speedometer.
- Sidewall is the height of the rubber from rim to tread. Lower sidewall = sharper steering, harsher ride.
- Speedometer error is the percentage your indicated speed will be off after the swap (positive = speedo reads lower than actual).